Worx.diy build it yourself Tv stand

 

 Design That Works for Your Space

Before cutting a single board, ask yourself:

• How big is your TV?

• Need drawers, shelves, or both?

• Want a “floating” look or a base with legs?

• Want it wall-mounted or freestanding?

For this tutorial, we’re going with:

• Width: 1800mm

• Height: 450mm

• Depth: 400mm

• Features: 2 drawers (push-to-open), 2 shelves, LED base lighting

 Worx.diy  Tip:
Sketch it out, or use a free tool like Sketch Up to visualize your build. Don’t overthink it simple is cool  and feel free to check out https://worx.diy/worx-marketplace                                                              

 

  Cut the Panels (Or Get Them Pre-Cut)

Cut List (Using 18mm board):

• Top & Bottom: 1800mm x 400mm (x2)

• Sides: 414mm x 400mm (x2)

• Vertical Dividers: 414mm x 400mm (x2)

• Back Panel (Optional): 1800mm x 450mm (x1, 6mm ply)

• Drawer Faces: 880mm x 200mm (x2)

• Drawer Boxes: Custom-fit based on runner specs

Use a circular saw and straight edge for your cuts — or hit up your local timber yard and have them cut it for you.

 

 Pre-Drill and Pocket Hole Everything

Now that your cuts are dialed in, time to prep those joints.

• Drill pocket holes on the underside of your top/bottom panels

• Add pocket holes to the sides and vertical dividers

• Mark where each divider will sit — spacing is everything

• Clamp + test fit before gluing

This gives you super clean joints with no visible screws — just sleek, modern edges.

💡 Worx Tip:
Don’t skip the dry fit. You’ll save yourself a world of pain later.

 

Assembling the Frame — Clean Lines Only

Alright, now that everything’s prepped, we’re building the structure from the inside out. This ensures perfect alignment, symmetry, and a clean silhouette.

Start with the Frame:

• Lay your bottom panel flat on a workbench.

• Attach the side panels using wood glue and pocket-hole screws.

• Add your internal dividers (these define the drawers and open compartments).

• Finish with the top panel, ensuring everything stays square.

🛠️ Pro tip: Use a right-angle square throughout the process. If you’ve never used one before, it’s one of those small tools that makes a massive difference in build quality.

 

 

 

---

Building Your Drawers:

• Measure each opening between the dividers.

• Subtract the clearance needed for your drawer slides (usually 3mm total).

• Cut the drawer sides, front/back, and base from 12mm plywood.

• Assemble using wood glue and brad nails or screws for added strength.

Install soft-close, push-to-open runners — and test the tension for that crisp click.

🛠️ Worx Tip: For even cleaner alignment, use a drawer slide jig. Not essential, but very helpful for modern builds where precision matters.

 

Sand, Seal, and Refine

This is where the entire aesthetic comes together. Smoothing out edges, rounding corners, and finishing the wood gives the piece its final tone and texture.

Sanding:

• Start with 120-grit, move to 220 for a smooth touch.

• Always sand with the grain.

• Round over any exposed edges slightly with a sanding block for a tactile, modern feel.

Sealing:

• Wipe all surfaces clean with a damp microfiber cloth.

• Apply a matte or satin water-based polyurethane (clear coat).

• Let dry, then sand lightly before the second coat.

🛠️ Design Note: A matte finish preserves the wood’s natural warmth and keeps the piece modern. Gloss feels dated for this kind of project.

Final Styling & Setup

Now that your build is done, it’s time to install and style it in your space. This step brings the personality.

Placement Ideas:

• Use clean black steel legs for an industrial-modern edge.

• Wall-mount the piece for a floating media unit look (be sure to reinforce the back panel).

• Set directly on a platform base for a minimalist, grounded appearance.

Styling Touches:

• Keep it simple. One sculptural lamp or plant goes further than clutter.

• Layer textures — a stack of matte magazines, a ceramic dish for remotes.

• Choose neutral tones with contrast (think black accents on pale wood).

---

A Personal Note on Craft

When I first built a version of this piece, it was because I couldn’t find anything that felt right — everything in stores felt too generic, too flimsy, or too overpriced. What started as necessity became something bigger. Each time I ran my hand across the wood grain, I felt more connected to the space I was creating.

That’s the core of Worx DIY — creating pieces that reflect you. Not mass-produced, but intentional. Not complicated, but considered.

 

Final Build Recap: Smart, Stylish, and Budget-freindly

Item	Approx. Cost (USD)
¾" Birch Plywood (2 sheets)	$80 – $110
½" Plywood for drawers	$30 – $40
Pocket Hole Screws + Wood Glue	$15 – $25
Push-to-Open Drawer Slides (set)	$25 – $40
Sandpaper + Finish (Matte Poly)	$20 – $35
LED Strip (optional)	$15 – $25
Tapered Legs or Wall Brackets	$25 – $45

🧠 Total DIY Cost: ~$210–$320
🎯 Retail Lookalikes Cost: $600+

➡️ Save big and get a piece that fits your space and your style — no mass-made junk.

---

🛠️ Time Breakdown

Day 1: Plan & Cut
Day 2: Build Frame
Day 3: Drawers & Finish
Day 4: Sand, Seal, and Install

Go at your own pace — build it over a weekend or tackle it during chill after-work sessions.

---

🧩 Custom Touches (Optional Add-ons)

• Add an LED strip behind for ambient glow

• Mount it floating-style for that high-end look

• Create matching side units or shelves later

• Drop in a drawer with a slide-out controller tray (for gamers or remote hoarders)

---